AIM VP-SDR V2 Max Slipper Clutch 3 Stud Pressure Plate Harley Touring Softail M8

VP-SDR FOR '13 A&S CLUTCH, 3 STUD STYLE
2017+ M8 Touring Models
Select Twin Cam Assist and Slip Clutch Models

This new VP-SDR V2 has more clearance than before and will work with most standard and CVO Harley Davidson derby covers. No spacer required if using said factory equipped derby covers.

(If there are any clearance issues, a 1/4 spacer will be needed per application.)

Features:
With the OEM 2013, 2017-2018 M8 springs, it handles up to 160-170 lbs-ft of torque. Screamin' Eagle springs will result in higher torque capacity.
High torque capacity yet slimmer profile and less weight than the previous SDR.
15 minute installation.
Install through the derby cover without removing the primary cover.
No modifications needed.
Kit Contents:
VP-SDR V2 MAX High Performance Variable Pressure Unit
Mounting Hardware
NOTE: FOR CABLE CLUTCH USERS 2021+ TOURING MODELS. It is highly recommended that you purchase the Optional Cable Clutch Adjust Nut PN: AIM008

This nut will allow you to make adjustments to your cable per service manual instructions.


NOTE: Clutch must be centered with the derby cover opening. Any offset derby cover opening will cause issues with clearance. Please double check with your application to make sure the clutch basket is centered with the derby cover opening.