AIM VP-SDR V2 Light Slipper Clutch 3 Stud Pressure Plate 2017+ Harley Touring

Fitment: 2017 and up Harley Touring Models (VP-SDR V2 LIGHT for A&S Clutch Models)

Harley Davidson Assist & Slipper Clutch / 3-Stud Style Clutch

This new VP-SDR V2 has more clearance than before and will work with most standard and CVO Harley Davidson derby covers. No spacer required if using said factory equipped derby covers. (If there are any clearance issues, a 1/4 spacer will be needed per application.)

Features:

With the OEM 2013, 2017-2018 M8 springs, it handles up to 140 lbs-ft of torque. Screamin' Eagle springs will result in higher torque capacity.

High torque capacity yet slimmer profile and less weight than the previous SDR.

15 minute installation. Install through the derby cover without removing the primary cover. No modifications needed.

Kit Contents:

VP-SDR V2 Variable Pressure Unit

Mounting Hardware + Pressure Plate Holding tool

NOTE: FOR CABLE CLUTCH USERS 2021+ TOURING MODELS. It is highly recommended that you purchase the Optional Cable Clutch Adjust Nut PN: AIM008

This nut will allow you to make adjustments to your cable per service manual instructions.

NOTE: Clutch must be centered with the derby cover opening. Any offset derby cover opening will cause issues with clearance. Please double check with your application to make sure the clutch basket is centered with the derby cover opening.